Choosing Products

Hi-Vis Safety Vests With Logo: Keep the ANSI Rating

Branding hi-vis gear is common, but a logo in the wrong place can undermine the garment class. What buyers should check.

Promogator By Promogator Staff • • 4 min read
Share
Hi-Vis Safety Vests With Logo: Keep the ANSI Rating

Crews on roads, job sites and parking lots need to be seen, and many companies want their name on that gear as well. Hi-vis safety vests with logo can do both, but only if the decoration does not undermine the garment's safety rating. This guide explains the classes in the ANSI/ISEA 107 standard, the rules that apply to logos and lettering, and what to check before you approve a branded hi-vis order.

Who needs high-visibility apparel

According to a 3M quick reference to ANSI/ISEA 107-2020, the federal Manual on Uniform Traffic Control Devices requires workers on or near public access roadways, including construction, maintenance, utility and emergency workers, to wear high-visibility safety apparel. An Oregon OSHA fact sheet notes that employers should assess their employees' exposure, and that workers without street or highway exposure, such as parking lot attendants and warehouse staff, are usually not required to wear it, though it still makes them more visible.

Requirements vary by job and state, so the employer's safety lead should set the class. The merch buyer's job is to keep that class intact.

Promogator catalog photo of CornerStone - ANSI 107 Class 2 Mesh Back Safety
Promogator catalog photo: CornerStone - ANSI 107 Class 2 Mesh Back Safety (SKU SANMAR-CSV405). An ANSI/ISEA 107 Class 2 mesh-back safety vest in orange with 2-inch reflective taping.

Understanding the classes

ANSI/ISEA 107-2020 groups garments by type and performance class. The 3M reference and the Oregon OSHA fact sheet summarize them:

  • Type O, Class 1: off-road workers with struck-by hazards who are not covered by the roadway rule. It carries the least material.
  • Type R, Class 2: roadway workers. The 3M reference lists minimums of 775 square inches of background material and 201 square inches of retroreflective material.
  • Type R, Class 3: higher-risk roadway work, with 1,240 and 310 square inches respectively, and retroreflective bands around each sleeve.
  • Type P: options for fire, police and EMS personnel.

Every compliant garment carries a label naming the standard, the type and class pictogram, and a flame resistance statement.

Promogator catalog photo of CornerStone - ANSI 107 Class 2 Dual-Color Safety
Promogator catalog photo: CornerStone - ANSI 107 Class 2 Dual-Color Safety (SKU SANMAR-CSV407). A Class 2 dual-color safety vest with contrast binding, reflective taping and chest pockets.

The rules for logos on hi-vis safety vests

This is where branding and safety meet. The 3M reference notes that the material amounts apply to the entire garment, front and back, and that any covered area cannot create a horizontal gap wider than 2 inches in the retroreflective material. Garments also need 360-degree visibility with horizontal gaps of 2 inches or less.

In practice:

  1. Never print or stitch over reflective tape. Place logos on the fluorescent background panels.
  2. Keep logos modest. Large back prints cover background material that counts toward the class minimum.
  3. Ask the supplier whether a given imprint size and placement keeps the garment within its rated class.
  4. Choose a decoration method suited to polyester, and confirm it does not affect the care label instructions.
  5. Keep the label. Do not remove or cover the ANSI label during decoration.

Some product pages add their own conditions; for example, a vest page may state that it must be fully zipped to comply with ANSI/ISEA 107.

Promogator catalog photo of Unisex USA-Made 50/50 High Visibility T-Shirt
Promogator catalog photo: Unisex USA-Made 50/50 High Visibility T-Shirt (SKU SSACTIVEWEAR-3752). A USA-made 50/50 high visibility t-shirt with reflective bands. Confirm the class on the label for your use.

Vests, shirts and seasons

Vests layer over any clothing and suit visitors and mixed crews. Hi-vis t-shirts suit warm-weather crews who would otherwise remove a vest. For winter, ask about hi-vis outerwear rated to the same class. Whatever you choose, match the garment to the class your safety lead requires, not to the look of the logo.

Hi-vis safety vests with logo: ordering checklist

  • Get the required type and class from your safety lead.
  • Choose garments labeled to ANSI/ISEA 107 for that class.
  • Place logos on background panels, never on reflective tape.
  • Confirm with the supplier that the imprint keeps the rating.
  • Allow production time after proof approval, as noted on our rush services page.

This article is general information, not safety or legal advice. Follow your employer's safety program and the standard itself.

Sources

Written with AI assistance and reviewed by Promogator Staff. Our editorial standards

Share this article

Promogator Staff

Written and reviewed by the Promogator team. Our editorial standards

Products mentioned in this article

Live pricing — updated Nov 18, 2026.

Need a quote?

Tell us what you have in mind and we will come back with pricing, lead times and options — no obligation.

No spam. We use your details only to answer this request.

Keep reading

Compare /

Compare Products

Highlighted rows = products differ on this attribute