Drinkware

Where can the logo go on a tumbler or mug, and how big can it be?

Short answer

On most tumblers and mugs, the logo goes on the front, centered on the body, or on the opposite side near the handle area. Many cups also allow a wraparound or a second spot on the back. The maximum size depends on the cup's shape and the imprint method, so the product page lists the exact imprint area.

  • Every product has its own imprint area, listed on its product page.
  • Common spots: front center, back, both sides, or a full wrap.
  • Curved and tapered walls limit height and width.
  • Laser engraving is one color; screen print allows up to six spot colors.
  • Send vector art and ask for a free proof to check size.

Why there is no single answer

A tumbler is not a flat sheet. The wall curves, often tapers toward the base, and may have a lid, handle, or rim that gets in the way. Each supplier tests a safe print zone for each cup. That zone is the imprint area, given as a width and a height. Your logo has to fit inside it.

Two cups that look alike can have different areas. Check the product page for each one before you design your artwork.

Common logo locations

  • Front center. The most common spot. Place it on the side facing the drinker's audience, away from the handle on a mug.
  • Opposite side. Many cups allow a second imprint on the back. This is how you get a logo on both sides.
  • Next to the handle. Some mugs offer a spot on each side of the handle, so the logo shows for both right-handed and left-handed users.
  • Wraparound. A design that runs around the body. This is typically done with sublimation or a full-color digital method, and only on products that support it.
  • Lid or base. Some items allow a small mark on the lid or the bottom. Offered on select products only.

What limits the size

Three things set the maximum size:

  1. Shape. A tall, narrow tumbler has a tall, narrow area. A wide mug body allows a wider logo.
  2. Imprint method. Each method has its own limits. Screen print handles up to 6 spot colors. Pad print handles up to 4. Laser engraving is one color, and it removes the finish to show the metal beneath. Fine text under 6 pt and very thin lines may not reproduce well. See imprint methods for a side-by-side look.
  3. Surface. Powder-coated stainless steel, glass, ceramic and plastic all take decoration differently, and not every method works on every material.

Mistakes to avoid

  • Designing a wide logo for a tall, narrow area. The art gets shrunk until the details disappear.
  • Putting a logo too close to a seam or handle. Placement near these spots may shift on the final cup.
  • Assuming a second location is free. A second imprint may add a setup charge, and the product page shows the setup details.
  • Using a low-resolution image. Vector files (AI, EPS, SVG, PDF) give the sharpest result.

How to check before you order

Open the product, read the imprint area and the methods listed, and then look at the free digital proof. The proof shows your logo on the actual product with its size and placement, so you can ask for changes before anything is made. Final results can differ slightly from the proof because of the material and the method.

Products that work for this

Real examples from our catalog, with live pricing. Tap one to see it with your logo.

Shop Tumblers

See all →

People also ask

What is the imprint area on a tumbler?

It is the width and height of the zone where a logo can be printed or engraved. It is set by the cup's shape and the imprint method. The product page lists it for each tumbler.

How do I choose logo placement on a mug?

Center the logo on the front for the simplest look. If the mug has a handle, many people choose a spot on each side of it so the logo shows to both left and right-handed users.

Can I print on both sides of a cup?

Often yes. Many cups allow a second location on the back or opposite side. Whether a product allows it, and any added setup charge, is shown on the product page.

Can a logo wrap all the way around a tumbler?

On some products, yes, usually with sublimation or full-color digital printing. Many cups only allow a front or two-sided imprint, so check the methods listed on the product page.

PromoAI · our AI shopping assistant

Ask PromoAI these questions

Tap one and PromoAI searches our live catalog and answers in seconds.

Was this answer helpful?

Written with AI assistance and reviewed by the Promogator team. Our editorial standards

Prices, minimums and production times change: the product pages always show the live numbers.

Compare /

Compare Products

Highlighted rows = products differ on this attribute