Laser engraving or pad printing: which is better for a custom Ember mug?
Choose laser engraving if you have a one-color logo and want the most premium, permanent look: it removes the outer finish and shows bright metal. Choose pad printing if your brand colors matter, because it uses real ink in up to 5 Pantone-matched spot colors. Both are limited to a 2.5 inch by 2.5 inch area.
- Laser engraving is one color, tonal, permanent and the most premium look.
- Pad print uses real ink in up to 5 Pantone-matched spot colors.
- Both methods fit an imprint area up to 2.5 by 2.5 inches.
- Neither method does full-color photo printing.
- Hand wash any customized Ember, even dishwasher-safe models.
Both methods work on every custom Ember we offer. The right one comes down to your logo and what you want the gift to say.
Laser engraving: the premium, tonal look
The laser removes the outer finish of the mug. The logo shows as bright, permanent metal. On the Ember Cold Tumbler, which is glass, laser etching gives a frosted logo instead.
- It is one color: the metal itself.
- It is crisp and permanent, so it will not peel or fade like a surface ink might.
- It suits executive gifts, client thank-yous and anniversary awards.
- We convert your logo to one-color engrave art, so a multicolor logo becomes a single-tone mark.
If your logo has fine detail, send a clean vector file so the engraved result stays sharp.
Pad printing: when brand colors matter
Pad printing puts real ink on the mug. You get up to 5 Pantone-matched spot colors, with 1 color included. Inks are mixed to your PMS numbers. If you send a PMS, HEX or RGB value, we confirm the closest Pantone on the proof. A printed color chip is available on request.
Pad print is spot-color printing. It is not full-color photo printing, so gradients and photos are not a good fit.
Choose it when:
- Your logo only works in its brand colors.
- You want the logo to stand out in color on a black or white mug.
- You are matching other branded items, such as a welcome kit.
What stays the same
- Size and placement: up to 2.5 by 2.5 inches, centered on the front. The free digital proof shows the exact size and placement.
- Minimum: 6 pieces.
- Production: about 7 business days after proof approval and payment, plus shipping. The product page shows the details.
- Function: the logo goes on the outside finish only. Temperature control, battery, charging coaster and the Ember app work as on a retail Ember.
- Packaging: each piece is inspected by hand and returned in its Ember retail box.
Care and mistakes to avoid
Hand wash every customized Ember. That includes models that are top-rack dishwasher safe at retail, such as the Mug 3. Ember advises that branded drinkware never goes in the dishwasher, to protect the coating and the logo. Never microwave a heated Ember.
Common mistakes:
- Sending a low-resolution image. A vector file (AI, EPS, PDF or SVG) is best.
- Picking pad print for a photo or gradient.
- Picking engraving when the brand color is the whole point of the logo.
- Skipping the proof check. Nothing is decorated until you approve it.
Quick rule of thumb
One-color logo, premium gift, long-term keepsake: engrave. Brand colors or a two-to-five color mark: pad print. If you are unsure, compare both on the proof. For specific models, see the Ember Mug 3 14 oz page.
Products that work for this
Real examples from our catalog, with live pricing. Tap one to see it with your logo.
Shop Drinkware
See all →People also ask
What is the difference between an engraved and a printed Ember mug?
An engraved mug has the finish removed by laser, so the logo shows as bright metal in one color. A printed mug has real ink on the surface, in up to 5 Pantone-matched colors.
Should I engrave or print my logo on an Ember?
Engrave a one-color logo for a premium, permanent look. Print when your brand colors matter or the logo uses several spot colors. Photos and gradients work with neither method.
What does a laser engraved Ember mug look like?
The logo appears as a bright, tonal metal mark where the outer finish was removed. On the glass Ember Cold Tumbler, laser etching gives a frosted logo. Your free proof shows it first.
Can I put a custom logo on an Ember Cold Tumbler?
Yes. Laser etching gives a frosted logo on the glass, or you can pad print in your colors. See the [Ember Cold Tumbler](/products/custom-ember-cold-tumbler) page.
Does a logo affect how the mug works or its warranty?
The logo is on the outer finish only, so heating, battery, coaster and app work as on a retail Ember. Our team can answer warranty questions about a specific order.
Ask PromoAI these questions
Tap one and PromoAI searches our live catalog and answers in seconds.