How do you charge an Ember mug?
Set your Ember mug on its charging coaster and plug the coaster into power with the cable and adapter. Make sure the gold rings on the mug base and the pins on the coaster are dry first. The mug charges while it sits there, and on the coaster it stays warm all day.
- Place the mug on the coaster and plug the coaster into power.
- Dry the gold rings and coaster pins before every charge.
- On the coaster, a heated Ember holds your temperature all day.
- Never immerse the coaster or microwave a heated Ember.
- If it will not charge, check for moisture, then contact Ember support.
How Ember charging works
Heated Ember drinkware charges through a charging coaster. The coaster has metal pins. The base of the mug has gold rings. When the two touch, power flows into the battery. There is no port on the mug itself.
The box for a heated model includes the coaster. Mug 3 and Tumbler 2 also include a cable and power adapter (Tumbler 2 lists a power cable). Plug the coaster in, then set the mug on top.
Why battery life varies
Off the coaster, a heated Ember runs on its battery. How long that lasts depends on the temperature you set, how hot the drink was when you poured it, the room temperature and how fast you drink. Typical figures by model:
- Ember Mug 3, 10 oz: about 90 minutes without the lid.
- Ember Mug 3, 14 oz and 16 oz: about 80 minutes without the lid. All sizes run 3+ hours with the included sliding lid.
- Ember Mug 2, 10 oz: up to 1.5 hours. The 14 oz runs up to 80 minutes.
- Ember Travel Mug 2+, 12 oz: up to 3 hours.
- Ember Tumbler 2, 16 oz: 3+ hours with the lid on.
On the coaster, all of these stay warm all day while the drink sits there.
Care and safety
- Keep the gold rings on the base and the pins on the coaster dry before charging.
- Never immerse the charging coaster.
- Never microwave a heated Ember. It is an electronic device, and a microwave can cause a fire and permanent damage.
- If you add a logo, hand wash only. Ember advises that customized drinkware never goes in the dishwasher, even for models that are top-rack safe at retail.
Logos and charging
A logo goes on the outside finish only. Temperature control, the battery and the charging coaster work the same as on a retail Ember. Promogator adds a logo by laser engraving or pad printing and returns each piece in its Ember retail box. If you are choosing a size for a gift, see the Ember Mug 3 14 oz for everyday coffee.
The Ember Cold Tumbler is not heated. It has no battery and no coaster, so there is nothing to charge.
For device support and Ember's own warranty, contact Ember support. Our team can answer warranty questions about a specific order.
Step by step
-
Dry the contacts
Wipe the gold rings on the base of the mug and the pins on the coaster until both are dry.
-
Plug in the coaster
Connect the charging cable and power adapter to the coaster, then plug into an outlet. Never immerse the coaster in water.
-
Set the mug on the coaster
Place the mug flat in the center so the base rings touch the pins. The LED shows it is charging.
-
Leave it to charge
Let it charge until the battery is full. Charging time varies, so check the LED or the Ember app.
-
Lift it off to use it
Take the mug off to carry it. Put it back on the coaster whenever you want all-day warmth.
Products that work for this
Real examples from our catalog, with live pricing. Tap one to see it with your logo.
Shop Drinkware
See all →People also ask
What is the Ember charging coaster?
It is the base that powers a heated Ember. The mug sits on it, and the metal pins touch the gold rings on the mug base. It charges the battery and holds your temperature while the mug stays on it.
Why is my Ember mug not charging?
First check that the gold rings and coaster pins are dry and clean. Make sure the coaster is plugged in and the mug sits flat and centered. If it still will not charge, contact Ember support for device help.
Can an Ember mug stay on the coaster all day?
Yes. The coaster is made for all-day warmth while the drink sits on it. AutoSleep puts the mug to sleep when it is empty or still, after about 2 hours idle, and it wakes with movement or liquid.
Does adding a logo change how an Ember charges?
No. The logo goes on the outside finish only. Charging, the coaster, temperature control and the app work as on a retail Ember. For warranty questions about your order, our team can help.
Ask PromoAI these questions
Tap one and PromoAI searches our live catalog and answers in seconds.