Custom Ember Mugs

What should I do if my Ember mug won't heat, connect or turn on?

Short answer

Start with power. Set the mug on its charging coaster, make sure the coaster is plugged in, and check that the gold rings on the mug base and the pins on the coaster are clean and dry. Add a drink so the mug wakes from AutoSleep. If it still won't heat, connect or turn on, contact Ember support.

  • Most problems start with power: coaster plugged in, contacts clean and dry.
  • AutoSleep is normal: an empty or still mug sleeps and wakes with liquid or movement.
  • Heating depends on the model, the set temperature and the battery level.
  • Not every phone may be compatible with the Ember app.
  • Ember support handles device repairs, and our team handles questions about your order.

A heated Ember is an electronic device, so most "it's dead" problems come down to power, contacts or sleep mode. Work through the checks below in order.

Check power first

  • Use the charging coaster. Every heated model comes with one. Make sure the cable is firmly seated and the adapter is plugged into a working outlet.
  • Seat the mug fully on the coaster. On the coaster the drink stays at temperature all day, so a mug that never heats there points to a contact or power issue.
  • Dry and clean the contacts. The gold rings on the base and the pins on the coaster must be dry before you charge. Wipe both gently. Never immerse the coaster.
  • Give it time to charge. Battery life depends on the set temperature, the drink's temperature at pour, room temperature and how fast you drink. A mug used off the coaster for a while may simply be flat.

Understand AutoSleep

An Ember sleeps when it is empty or still. On the coaster, that happens after about 2 hours idle. It wakes with movement or liquid. If the mug looks off, pour in a drink or pick it up and move it before assuming it has failed.

If the mug won't heat

  • Confirm there is liquid in it and that it is awake.
  • Check the temperature setting. Mug 3 and Tumbler 2 use presets on the drinkware, Mug 2 runs at 135°F out of the box or follows the app, and the Cups need the app to change their temperature.
  • Remember that the Ember Cold Tumbler is not heated. It does not pair with the app, and it keeps drinks cool through its double wall, not electronics.
  • Never microwave a heated Ember. The microwave can cause a fire and permanent damage.

If it won't connect to the app

  • Confirm the mug is awake and charged.
  • Make sure your phone's Bluetooth is on and the Ember app is open and up to date.
  • Keep in mind that not every phone may be compatible with the app.
  • The app is optional on Mug 2, Mug 3, Tumbler 2 and the Travel Mug 2+, which work without it. The Cups need it only to change and save their temperature.

Blinking lights and resets

LED patterns differ by model, and you can set the LED colour yourself in the app, so a colour alone does not always signal a fault. We do not list blink codes or reset steps here because they vary. Use Ember's own guide for your model, or ask Ember support, which handles device help.

Customized mugs and warranty

The logo goes on the outside finish only. Temperature control, battery, charging coaster and the Ember app work as they do on a retail Ember. Ember's own warranty terms are Ember's to explain. If you ordered through us and have a warranty question about a specific order, our team can answer it.

Once a mug is customized, hand wash it only. Keep it out of the dishwasher, even if the retail model is top-rack safe, and dry the base well before charging.

Products that work for this

Real examples from our catalog, with live pricing. Tap one to see it with your logo.

Shop Drinkware

See all →

People also ask

Why is my Ember mug not heating?

Check that it is on a plugged-in coaster with clean, dry contacts, that it contains liquid and that it is awake. Also confirm the temperature setting for your model. A low battery after time off the coaster can look like no heat.

Why won't my Ember mug connect to the app?

Wake the mug with liquid or movement, make sure it has charge, and turn on Bluetooth on your phone. Not every phone may be compatible with the app. If it still fails, ask Ember support.

What does a blinking light on my Ember mug mean?

It depends on the model and the LED settings, so we cannot give one meaning. Mug 3 and Tumbler 2 show temperature and battery on the LEDs. Check Ember's guide for your model or contact Ember support.

How do I reset an Ember mug?

Reset steps vary by model, and we do not list them here. Ask Ember support or use Ember's official guide for your exact mug before trying anything.

Can I put my customized Ember mug in the dishwasher?

No. Once customized, every model should be hand washed only. Ember advises that customized drinkware never goes in the dishwasher, to protect the coating and the logo.

PromoAI · our AI shopping assistant

Ask PromoAI these questions

Tap one and PromoAI searches our live catalog and answers in seconds.

Was this answer helpful?

Written with AI assistance and reviewed by the Promogator team. Our editorial standards

Prices, minimums and production times change: the product pages always show the live numbers.

Compare /

Compare Products

Highlighted rows = products differ on this attribute