How do I descale or clean the inside of an Ember mug?
Fill the mug with warm water and a little dish soap, scrub the inside with a soft bottle brush, then rinse and dry. For stains or scale, a gentle household soak such as diluted white vinegar or baking soda is typical. Mug 2 is hand wash only. Mug 3 and Tumbler 2 are top-rack safe at retail, but hand wash once customized.
- Hand wash any customized Ember; some retail models are top-rack safe, Mug 2 is not.
- Fill the mug to clean it. Never submerge the mug or the coaster.
- Vinegar and baking soda soaks are common household methods, not Ember instructions.
- Use a soft bottle brush, not abrasive pads.
- Dry the gold rings and coaster pins before charging.
Start with the care rules for your model
An Ember mug has a heater and sensors built into the drinkware. Do not submerge the mug or the charging coaster. Fill the mug to clean the inside.
Care differs by model:
- Ember Mug 2: hand wash only. A bottle brush helps reach the bottom. Dry it well.
- Ember Mug 3 and Ember Tumbler 2: top-rack dishwasher safe as retail items.
- Ember Cups (6 oz and 14 oz): hand wash only. The electronics are sealed to IPX7, but dishwasher heat can damage them.
- Any customized Ember: hand wash only, even on models that are dishwasher safe at retail. Ember advises that customized and branded drinkware never goes in the dishwasher, to protect the coating and the logo.
Everyday cleaning
- Pour out the drink and rinse the mug after use.
- Fill it with warm water and a little mild dish soap.
- Wash the inside with a soft bottle brush.
- Rinse, then dry the inside and outside.
Rinsing soon after use makes stains easier to remove later.
Stains and scale
For coffee or tea stains and white mineral film, people typically use a gentle soak. These are common household methods, not instructions from Ember. Check Ember's own care guidance for your model before you try them, or ask Ember support.
- Diluted white vinegar and warm water. Typically used for mineral scale from hard water. Fill the mug partway and let it sit.
- Baking soda and warm water. Typically used to lift coffee and tea stains. Use a loose paste or a solution.
Soak times typically run from about 30 minutes to a few hours. Then scrub lightly with the bottle brush and rinse several times. If you still smell vinegar, rinse again with plain warm water.
Mistakes to avoid
- Submerging the mug or the coaster. Never immerse the charging coaster. Before charging, the gold rings on the base and the pins on the coaster must be dry.
- Abrasive pads. Steel wool and scouring pads can scratch stainless steel. A soft brush is enough.
- Putting a customized piece in the dishwasher. Hand wash it, whatever the model.
- Microwaving to loosen residue. Never microwave a heated Ember. It is an electronic device, and the microwave can cause a fire and permanent damage.
- Scrubbing the logo. The logo sits on the outside finish only. Keep scrubbing to the inside and wipe the outside gently.
If the residue will not budge
Repeat the soak instead of scrubbing harder. If the mug still looks or behaves wrong, contact Ember support, since they handle device questions.
The Ember Cold Tumbler is borosilicate glass and is not heated, so standard glass cleaning applies. Once customized, it is hand wash only too.
Step by step
-
Remove from the coaster and empty
Lift the mug off the charging coaster and pour out any drink. Let it cool if it is still warm.
-
Add your cleaner
Fill the mug partway with warm water and a little dish soap. For stains or scale, people typically use diluted white vinegar or a baking soda solution instead. Check Ember's care guidance for your model first.
-
Let it soak
Typically 30 minutes to a few hours for heavy stains or scale. Never submerge the mug or the coaster.
-
Scrub gently
Use a soft bottle brush on the inside walls and bottom. Skip steel wool and abrasive pads.
-
Rinse and dry
Rinse until no vinegar smell remains, then dry the inside and outside. Make sure the base rings are dry before you set it on the coaster.
Products that work for this
Real examples from our catalog, with live pricing. Tap one to see it with your logo.
Shop Drinkware
See all →People also ask
How do I remove coffee stains inside an Ember mug?
Fill it partway with warm water and baking soda, let it soak, then scrub with a soft bottle brush and rinse. This is a common household method, not an Ember instruction. Repeat the soak for old stains.
Can I clean an Ember mug with vinegar?
Diluted white vinegar and warm water is a common household way to loosen mineral scale. Ember does not list it in the care facts we use, so check Ember's guidance for your model. Rinse several times afterward.
My Ember mug has residue buildup. What do I do?
Soak with a gentle household cleaner such as diluted vinegar or baking soda, scrub softly and rinse. Repeat the soak rather than scrubbing hard. If it persists, contact Ember support.
What is the best way to clean a heated mug?
Hand wash the inside with warm soapy water and a soft brush. Keep the base, gold rings and coaster dry. Never microwave an Ember, and keep a customized Ember out of the dishwasher.
Ask PromoAI these questions
Tap one and PromoAI searches our live catalog and answers in seconds.